high quality aluminium tube

high quality aluminium tube 1.6063,6061,6082,6463,6013 2.Diameter:6-350 mm 3.wall thickness:>0.5 mm 3.OEM sevice

high quality aluminium tube1.6063,6061,6082,6463,60132.Diameter:6-350 mm 3.wall thickness:>0.5 mm3.OEM sevice1.Key sepcial features:

Alloy :2011,2017,2024,6061,6063,7075,7A04 and 7A09

Process of cold drawn is available.

seamless

Temper: O,F, H112,T4,T5,T6,T3 and T8

Diameter: outer:15- 500 mm

                inner :10-500mm

Thickghass: 3 -30 mm

Customized lengths are accepted

ASTM BS AND EN STANDARD

FOB Shanghai

Alloy	NO	Temper	Out Side diameter(mm)	Thickness(mm)	Length(mm)
1XXX	1060,1100,1070A,1050A,1035,1200	O,H112,H14,H18,F	6-550(Max)	>=0.4	10-12000
2xxx	2A11,2A12,2014,2024,2007	O,T4,T42,T6,T62	6-550(Max)	>=0.4	10-12000
3xxx	3003,3A21	O,H12,H14,H16,H18,F	6-550(Max)	>=0.4	10-12000
5xxx	,5052,5083,5154,5450	O,H32,H34,H36,H38,F	6-550(Max)	>=0.4	10-12000
6xxx	,6061,6063,6082	O,T4,T42,T6,T62,T83,T831	6-550(Max)	>=0.4	10-12000
7xxx	7A04,7A09,7075	0,T6,T62,T73	6-550(Max)	>=0.4	10-12000

Here are some our standard round aluminium tubes for reference.

Diameter	6	8	10	12.5	15	16	19	20	22
Gauge	0.8	0.8	1.0	1.0	1.0	1.3	5.5	2.5	1.4
Diameter	25	30	35	38	40	50	60	70	90
Gauge	2.5	1.5	2.5	4.0	4.0	5.0	5.0	5.0	5.0

Material: Aluminium alloy 6063, 6061, 6005, etc

Typical chemical composition  (GB/T3190)

Aluminum Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurity	Al
6063	0.2-0.6	<0.35	<0.1	<0.1	0.45-0.9	<0.1	<0.1	<0.1	<0.15	Rest
6061	0.4-0.8	0.7	0.15-0.4	0.15	0.8-1.2	0.04-0.35	0.25	0.15	≤0.15	Rest
6005	0.6-0.9	0.35	<0.1	<0.1	0.40-0.6	<0.1	<0.1	<0.1	<0.15	Rest

Temper: T5, T6, etc

Examples

6063-T5 aluminium tube

T5 temper 6063 has an ultimate tensile strength of at least 22,000 psi (152 MPa) in thicknesses up to 0.5-inch (13 mm), and 21,000 psi (145 MPa) from 0.5 to 1.0-inch (25 mm) thick, and yield strength of at least 16,000 psi (110 MPa) up to 0.5-inch (13 mm) and 15,000 psi (103 MPa) (from 0.5 to 1.0-inch (25 mm). It has elongation of 8%.

6063-T6 aluminium tube

T6 temper 6063 has an ultimate tensile strength of at least 30,000 psi (207 MPa) and yield strength of at least 25,000 psi (172 MPa). In thicknesses of 0.124-inch (3.1 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%.

 2.we also can supply you

Alloy:1XXX, 2XXX,5XXX,6XXX,7XXX

Temper: O, H24, T4,T6,H18,H112,H34

 1)Round Tube

  OD:6mm-200mm

  Wall thickness:0.5mm-32.5mm

2)Square Tube

   Edge length:10mmX10mm-70mmX70mm

   Wall thickness:1mm-5.0mm

3) Rectangular Tube

   Edge length:14mmX10mm-90mmX60mm

   Wall thickness:1mm-5.0mm

4) Wave Guide Tube    Edge length:15.8mmX7.9mm-72mmX34mm

   Wall thickness:1mm-3.0mm 

3.picture show

welcome your enquir and visit! Free can be sent!